With the WCH-02P (two panels, cassettes or modules), WCH-04P (four panels, cassettes or modules), and WCH-06P (six panels, cassettes or modules) capacity, the rugged metal housings can be wall mounted in main cross-connects, telecommunication rooms or other areas where space is a premium. The WCH housing provides interconnect or cross-connect capabilities between the outside plant, riser or distribution cables and the opto-electronics.
From fiber and cable routing and strain-relief to port labeling and termination, these housings reduce the risk of error that can disrupt networks. In 2016, FCI Asia Pte was acquired by Amphenol.Corning wall-mountable connector housing (WCH) product family offers enhanced innovative features that make installation and troubleshooting of fiber optic connectivity faster, easier and more cost-effective. In 1998, Berg Electronics was acquired by FCI (Framatome Connectors International) for $1.85 billion. The shape of the connector housing makes it very easy to determine the pin number allocations by visual inspection. The male PCB connector on the 3½-inch floppy drive is normally a polarized right-angle male header, which is a TE Connectivity / AMP 171826-4, the straight model is AMP 171825-4. Example part numbers are any of TE Connectivity / AMP 170204-* (loose pieces) or 170262-* (pieces supplied in strips), where * is 1 or 2 or 4. The part numbers used for the female contact pins depends on the detailed design, the surface coating (for example tinned or gold plated) and the form of supply. The plastic connector housing is most often white, as shown ( TE Connectivity / AMP 171822-4), but black is also common. The power cable from the ATX power supply consists of 20 AWG wire to a 4-pin female connector. The power connector on the 3½-inch floppy drive, informally known as "the Berg connector", is 2.50 mm pitch (distance from center to center of pins). the two-pin Berg connectors used as jumpers for motherboard configuration.įloppy drive power connector Floppy Drive Power Connector.the two-pin Berg connectors used to connect the front panel lights, turbo switch, and reset button to the motherboard.the four-pin polarized Berg connectors used to connect 3½-inch floppy disk drive units to the power supply unit, usually referred to as simply a "floppy power connector", but often also referred to as LP4.
CONNECTOR HOUSING PC
Some of the more familiar ones used in IBM PC compatibles are: Louis, Missouri, now part of Amphenol.īerg connectors have a 2.54 mm (0.100 in) pitch, pins are 0.64 mm (0.025 in) square, and usually come as single or double row connectors.
Berg connectors are manufactured by Berg Electronics Corporation of St. Berg connector for power is shown on the left data cable on right.īerg connector is a brand of electrical connector used in computer hardware. Please consider expanding the lead to provide an accessible overview of all important aspects of the article. This article's lead section may be too short to adequately summarize the key points.
0 kommentar(er)
